It's the brains behind your generator system. The automatic transfer switch (ATS) continuously monitors the power coming from your utility. When the power goes out, the ATS automatically transfers power from the utility to your generator. When utility power is restored, the ATS turns off your generator and transfers back to power from the utility grid.
Automatically transfers power to your generator during an outage
- Designed for use only with KOHLER generators equipped with RDC2 or DC2 controls.
- Installs indoors or outdoors.
- Available in service-entrance models.
- Optional external LED display.
- Corrosion-resistant aluminum enclosure.
- 5-year, 2000-hour limited warranty.
- 100-amp models available
- Volts: 240 V (single-phase).
- Poles: 2 (single-phase).
Amps 100 Phase Single Phase Voltage 240 Frequency 60 Hz Wires 3 Poles 2 Transfer Switch Type Standard Load Center w/Load Center # of circuits in Load Center 12 spaces Generator Compatibility All single-phase KOHLER Generators with RDC2 or DC2 controllers Load Control Time Delay Yes Enclosure Material Steel Enclosure Type Indoor Certifications/Listings UL Listed Controller RDC2/DC2 Position indicating LEDs Optional Source available indicating LEDs Optional Accessory board with audible alarm, input and output connections, 2-week exercise option, and 10 minute load control delay option No External alarm module available for remote status indication and remote generator set start/stop No Common / fault relay No All-in-one main distribution panel and ATS No Weight 26 lbs. (12 kg) Dimensions (L x W x H in.) 610 mm x 330 mm x 154 mm (24.0 in. x 13.0 in. x 6.0 in.) Warranty 5-year limited Country of Origin US Price (Starting at MSRP) $560.00